• TÜV tested
• Transparent protective and EMERGENCY STOP flap
• No motor brake or connection for it available
• Use on various machine tools, e.g. (industry, wood splitters, etc.)
• AC voltage: 400V
• Power (P): up to 8.3 KW
• IP: 54
The terminal block with the 4 connections is connected to the motor.
Connect green / yellow to the protective conductor and connect the other 3 terminals to the motor cables.
IMPORTANT: so that a locking function is given, the double terminal block, which is connected to A and 1, must be connected to a thermal contact or another external switch. If there is no thermal contact or ext. If there is a switch, the contacts on this terminal block must be bridged. If it is not done, only a push button function is available.
A consumer, e.g. a work lamp, can be connected to the second terminal block, which is connected to N and 6.
Caution: Do not interchange the double terminal blocks, as this could result in damage to the switch or the system.
There are 3 housing screw connections. One for the motor cable and 2 smaller ones for an external emergency stop device or additional lighting. If these are not required, an M12 blind screw connection / rubber stopper can be used for cable glands.
Switches of the type DZ or similar are placed on the market by some suppliers. The origin and quality of these switches is mostly questionable and also not sufficiently certified. Sys2sell only stocks original parts from the manufacturer.