DZ6 230V
Technical specifications:
• AC voltage: up to 250V
• Power (15A): up to 3.7 KW
• 15A
• 2 normally open contacts
• With latching function and undervoltage release
• IP55
Material:
• 4x flat plug 6.3mm female (3.4 and 6.8)
• 1 x flat plug 2.8mm female (A1)
Connection:
The power supply on 3 and the neutral conductor (blue) on 7.
Connect the motor feed and return lines on 4 and 8
If no thermal contact is connected to A1, a bridge must be set between A1 and 4, otherwise there is no latching function but a pushbutton function
The solenoid can also be triggered via A1 using an external emergency stop switch or thermal contacts.
If there is no latching function when the thermal contact is connected, we disconnect the thermal contact and set a bridge between 4 and A1 to rule out that the button is defective
